Consultants’ Comments

• “The design and shape of the finishing cups are the best! They fit the anatomical profile far better than traditional cups, discs and points.”
• “Removes flash very well – there is a polisher for practically every possible crevice.”
• “We used the system to finish provisionals and received positive feedback from patients.”
• “Great system, especially if you do a lot of anterior composites.”
• “Smooth running and minimal vibration.”
• “Not thin enough to access narrow proximal areas. Would like the flame shape more pointed.”
• “Some of the cups had extra tags on them.”
• “Finishers are “out of round” and created excessive vibration.”
• “Sometimes difficult to seat the plastic mandrel in the handpiece.”

Clinical Tips

• Pressure needs to be varied for effectiveness. Apply light, rotating pressure for smooth surface.
• You can use both the internal and external sides of the mini cup shape! The concave cup shape on the exterior fits nicely over the rounded, convex facial surface of the teeth and the thin edge fits into the cervical and proximal line angles.
• Enhance minis are not as aggressive as regular Enhance – they put a higher gloss on the composite even before using Pogo.
• On its side, the barrel-shaped cup contours, shapes and finishes occlusal surfaces perfectly.
• Apply water and air spray while finishing for improved visibility of the surface texture/contour.
• I would still remove most excess with finishing burs before using the system.

Evaluation Highlights

Enhance mini Finishing System was evaluated by 33 consultants, and used 844 times in total.

• Efficient
• Easy to use
• Single-use, versatile system
• Removal of excess composite, finishing and polishing
• Good adaptability, size and easy access

Unique Features

• Smaller finishers for improved access and versatility.
• Modified shapes, adapt well to anatomical profile.
• One-step (finishing).
• Single-use, versatile and efficient.

Indication

• One-step finishing of direct composite and compomer restorations.

Description

Enhance® mini Finishing System is a single-use, pre-mounted finishing system containing cups, points and discs fabricated with cured urethane dimethacrylate resin and impregnated with aluminum oxide. They are designed for finishing composite surfaces and preparing them for their final polish. Enhance® mini Finishers are smaller than regular Enhance® to offer improved access to all anatomical areas. The system is designed to deliver a smooth, contoured surface with a pre-polished surface luster in a single step. Enhance® mini Finishing System is available in an introductory kit containing 60 finishers (20 cups, 20 discs and 20 points), and one Enhance® Pogo® polishing system sample pack containing three cups, discs and points each. Refill packs are also available containing 40 cups, discs or points.