“Easy application after etching, prior to bonding material for all fillings.”
“The application of the material appears to have assisted with sensitivity and it does remove easily.”
“I like the active ingredients in the product. I also like the color and consistency.”
“I found it helpful when I used in Class V.”
“The liquid form that is easier to manipulate and make sure proper coverage is achieved.”
“The lack of bristles at the tip of the applicator does not allow you to scrub the gel into the pulpal floor where you need it the most.”
Description
MicroPrime G Gel is a desensitizing agent that contains both glutaraldehyde and HEMA to facilitate patient post-operative comfort. The gel is applied with a flocked applicator tip to make placement of the material easier. It works with most all cements and dentin bonding agents while not affecting their bond strength.
Unique Attributes
Contains glutaraldehyde and HEMA
Facilitates patient comfort
Compatible with popular adhesive systems, cements, and substrates
Antimicrobial
Clinical Tips
Use with rubber dam, if possible, to avoid soft tissue contact as it may burn the soft tissues
Proper suction and isolation of the area is advised as the gel does need to be rinsed well after placement
Express a small amount into the base of the preparation, and use the brush applicator to spread material
Use plenty of the gel; use the tip to swirl it around to cover the prep entirely
Do not dry teeth completely
Use full 30 seconds to scrub and apply two layers
Indications
Nonbonded and bonded applications
Placement under dental cements or other restorative materials-temporary, provisional or final
May be used to eliminate post-operative sensitivity under amalgam restorations
Assists dentin bonding agents by supporting the collagen framework, thus making it easier for the adhesive to penetrate the tooth
“One of the best fluoride varnishes I’ve used to date!”
“The consistency is great, and it does not clump as other fluorides do.”
“Patients noted they liked it as it retains the ‘fresh from the dentist’ feel, as opposed to having the sticky feeling they once had.”
“Clear and smooth application, and it retains the clear hue once applied.”
“The wait time post application of 15 minutes is a great advantage.”
“We got great feedback from all the patients that received this varnish about texture and flavor.”
“The hygienist could easily place this product before I come to do the exam.”
Description
Clinpro Clear Fluoride Treatment is a 2.1% sodium fluoride, water-based fluoride applied topically to enamel and dentin for the treatment of hypersensitive teeth. It contains 9,500 ppm fluoride as well as added calcium and phosphate. The product is packaged in a 0.5 ml unit-dose L-Pop.
Unique Attributes
Contains 2.1% sodium fluoride.
9,500 ppm ready-release fluoride as well as added calcium and phosphate.
Press and go L-Pop delivery system.
Water-based formula will not stick to unwanted surfaces or clog suction lines.
Free of common allergens.
Clinical Tips
Short wait time after treatment allows for higher patient acceptance.
Works well in root sensitivity cases.
Really worked well on a patient with high gag reflex as the consistency was very watery and not sticky at all.
Be sure to read the instructions on how to open the varnish carefully to avoid spillage.
“Easy application, even in less-than-ideal situations.”
“I received good feedback from patients that their sensitivity was reduced.”
“Great flavor selection and patients liked the taste.”
“I like that the color of the material does not stand out on a patients’ teeth.”
“Teeth can be moist while applying this varnish.”
“I did not like the immediate setting and crystallization of the fluoride while applying it in too moist an environment.”
“It adheres to the teeth quickly and very effectively.”
Description
Profluorid Varnish is a 5% sodium fluoride varnish.
Non-messy, single-dose delivery system that includes the applicator brush.
Transparent, tooth-shaded color – no obvious appearance on patient’s teeth.
Five flavors: Melon, Cherry, Mint, Caramel, and Bubblegum.*
Contains Xylitol.
Does not contain common allergens: tree nuts, peanuts, corn, shellfish, eggs, milk protein, soy, gluten, triclosan, petroleum, red dye/artificial coloring, saccharin or aspartame. *New Cola Lime flavor added since this evaluation
Unique Attributes
Teeth do not have to be dry to apply – they can be moist.
Sets quickly in seconds after contact with saliva.
Enhanced flow characteristics to reach areas that otherwise may be missed.
Clinical Tips
To achieve optimum sensitivity relief, I found that two applications worked the best.
If too much is applied, it gets goopy when mixed with saliva. Therefore, when placing make sure to focus on applying a thin coat.
Be mindful of placement, as it can be a hassle to remove from soft tissues.
“The impressions obtained after using Take 1 were smooth and detailed.”
“The low viscosity is much better than Traxodent.”
“I do Cerec crowns every day and it achieves excellent hemostasis and retraction to view the crown margins.”
“I used Take 1 instead of a second cord in a two-cord technique. I hate packing cord and Take 1 eliminated the need for the second cord effectively.”
“Does not retract tissue as well as the current product I use.”
“The high viscosity was difficult to extrude, and the tip was too wide.”
“If the tissue was compromised, the margin was not always picked up in the impression.”
“Easy to apply and clean – excellent product.”
Indications
Both traditional and digital impressions
Veneer or crown cementation
Class II, Class III, and V restorations
Clinical Tips
If the patient has tight tissue, it is difficult to get the high-viscosity paste intra-sulcular. In these cases, it is better to use the “two-cord” technique replacing the second cord with the low-viscosity paste.
Take a pre-impression bite and then apply the Take 1 into the bite and reseat it for great hemostasis and retraction.
Use of compression caps greatly increases amount of retraction.
For the high-viscosity version, use a wet finger and pat in the material into the sulcus.
Description
Take 1™ Retraction Paste unidose delivery, retraction and hemostasis paste:
15% aluminum chloride and kaolin clay provide hemostasis and gentle retraction
Designed to deliver tissue displacement to enhance or replace a cord technique
Universally compatible with standard composite dispensers
Unique Attributes
Each unidose is individually packed to keep material fresh
Available in Low Viscosity and High Viscosity: ‚àí High Viscosity: thicker paste to achieve gentle retraction and hemostasis without a cord ‚àí Low Viscosity: thinner paste to achieve retraction or replace the second cord in a double-cord technique while providing hemostasis
Quick clean up with rinsing and air drying to remove residue
