by Dental Advisor | Jan 11, 2022
Consultants’ Comments
- “The mask was very comfortable for our patients. They loved it. It fit well and didn’t pinch or leave any marks on the patient’s face.”
- “Easy to assemble and use.”
- “The mask is lightweight, low profile and small – the tubing is also lightweight.”
- “I’m able to do dentistry unimpeded using this system.”
- “I liked the ability to see through the mask.”
- “We found that the system was effective in delivering nitrous oxide and oxygen.”
- “I liked the scented masks. Patients didn’t complain about a plastic/rubber smell.”
Clinical Tips
- Size selection is very important – go down in size.
- Stretch the mask laterally when placing it and make sure the hose goes behind the ears.
- Let tubing dry for 5 hours after sterilization before use or it will be tacky and sticky.
- Turn the vacuum hose to the lowest power – the tight fit allows the evacuation of
- too much nitrous if you do not adjust the scavenging unit down.
- When using CSR-wrapping the tubing for sterilization, make sure there are no kinks in it.
Evaluation Highlights
Axess Low Profile Nasal Mask System was evaluated by 33 consultants, and was used 405 times in total.
- Soft, pliable and low profile translucent and clear single-use masks.
- Masks available in unscented, bubble-gum and mint scents.
- Lightweight, autoclavable tubing.
- Provides for good access to the clinical site.
Special Features
- Slim, low profile mask allows good visibility and access to the clinical site.
- Slender, lightweight scavenging circuit tubing to maximize accessibility to the oral cavity.
- Translucent and clear masks show the patient breathing – the masks fog up on exhalation.
- Comfortable for patients.
Indication
- Use when nitrous oxide/oxygen sedation is required.
Description
Axess™ Low Profile Nasal Mask System is used to deliver nitrous oxide/oxygen and to remove excess and exhausted gases. It consists of single-use, disposable nasal masks and reusable scavenging circuit tubing. The masks are small, low profile, latex-free and pliable for stability, complete access to oral cavity and to minimize ambient nitrous oxide and gas leakage from the mask. Masks are available in packs of 24 in either small, medium or large and for each size either as unscented (clear), bubble-gum scented (pink) or mint-scented (green) masks. Axess Scavenging Circuits are also latex-free and suitable for Crosstex/Accutron’s RFS Remote Flow System and In-Line/Accu-Vac vacuum controllers. The slender tubing wraps behind the patient’s ears and is secured by a slider under the chin. They are available in single packs with 6-foot long tubing, a complimentary selection of masks, a small gas connector, and various scavenging system adapters. Crosstex and Accutron are now proud members of HuFriedyGroup.
by Abigail | Jun 11, 2020
Consultants’ Comments
- “Very smooth injection of gutta percha.”
- “I have a traditional elements™ obturation system, and the new elements™ IC is cordless and more ergonomic!”
- “The gutta percha slightly backed up after extruding, which was nice.”
- “I liked the speed that the system heated to my desired temperature.”
- “I would prefer it if the time it takes for the plunger to travel through the hand piece to engage the cartridges was faster.”
- “The unit would ‘time-out’ and automatically shut-off quicker than I would like.”
- “The gutta percha cartridge tips were was to bend and insert into the canals.”
Clinical Tips
- The unit has an automatic shut-off timer, so do not start warming the units too early or they may shut-off before you are ready to use them.
- Do not overlook the included cartridge tip bender. It is very effective at obtaining the desired angulation of the gutta percha cartridge tips prior to obturating.
- The smaller tips bend very easily. Be cautious when placing into the canals, as to not bend them out of shape.
Evaluation Key Features
The elements IC Obturation System:
- Was evaluated by 9 consultants
- Had an average of 17 uses per consultant
- Received a 96% clinical rating
Description
The elements™ IC Obturation system:
- Cordless
- Downpack heat source and backfill gutta percha extruding unit in one system
- Inductive charging and extended battery life compared to previous versions
- Backfill unit contains precise digital temperature control with rapid heating and adjustable heating range
- Downpack unit features aerogel insulation for a high level of protection against heat
by Abigail | May 7, 2019
Evaluators’ Comments
- “This is probably the best dental dam I have ever used. I was very pleased with it.”
- “It is extremely flexible and doesn’t tear when stretching it.”
- “Easy to place and floss it through without the need for lubrication of the dam.”
- “A darker color would provide more contrast to the teeth.” *
* Since the evaluation, a new, darker color has been introduced
Unique Features
- The tear resistance of ISODAM was very good, and consultants found it performed at least as well as latex dams. Holes can be placed close together, as the material readily stretches. The surface smoothness allowed easy placement between teeth. The light blue color was neutral and easy on the eyes. The few instances of tearing that occurred were during hole punching or initial placement. Once in place, ISODAM was durable. The lightly powdered surface and smooth texture were reported to be comfortable to patients.
https://www.dentaladvisor.com/wp-content/uploads/2019/05/Nu-Radiance_Nu-Radiance-Classic_CE_Graphs-Recommend.jpg
Description
ISODAM is a non-latex dental dam formulated from synthetic polyisoprene (similar to natural rubber). According to the manufacturer, it is pre-cut and formulated to provide exceptional stretch, strength and tear-resistance while eliminating the potential for allergic reactions associated with latex products. ISODAM is light blue in color and is supplied in 5”x5” and 6”x6” square sheets, in both medium and heavy gauges. It is appropriate for all operative dentistry procedures. ISODAM was evaluated by 25 consultants in 468 uses. This non-latex dental dam received a 96% clinical rating.
by Dental Advisor | Oct 24, 2018
Consultants’ Comments
- “This material adapts beautifully, and it retains cusp form without slumping.”
- “Easy to use, versatile, good radiopacity and strength.”
- “I was surprised at how well it flowed into deep restorations.”
- “Very good esthetics and good shade matches with teeth.”
- “Adaptation was great; patients were very happy with the outcome.”
- “Cuts restoration time very significantly and drastically reduces finishing time.”
- “You can use it as a base and the depth of cure is excellent.”
- “I liked the freedom from bubbles and the high luster.”
- “I liked the longer and easily bendable tips that came with it.”
Clinical Tips
- Give it time to flow into crevices before curing.
- Adapts into place well with an explorer.
- Make sure the tips used to dispense the material have a wide gauge so that less pressure can be applied to the syringe.
- Create cuspal inclines with the syringe.
- This composite can be dragged to a fine feather edge, making it easy to blend it into the adjacent tooth structure.
- It polished with a Brownie point to a clinically acceptable finish.
Evaluation Highlights
G-aenial™ Universal Injectable was evaluated by 29 consultants, with a total of 432 uses.
• Easy to dispense and flows well
• Adaptable and easy to shape
• Versatile
• Efficient, saving chairside time
• Good radiopacity
• Esthetic
Indications
- Base or liner
- Direct restorations in Classes I through V
- Repair of (in)direct and provisional restorations, defective margins when in enamel
- Core build-ups
- Fissure sealants
- Blocking out undercuts
- Sealing sensitive areas
