Axess Low Profile Nasal Mask System
Consultants’ Comments
- “The mask was very comfortable for our patients. They loved it. It fit well and didn’t pinch or leave any marks on the patient’s face.”
- “Easy to assemble and use.”
- “The mask is lightweight, low profile and small – the tubing is also lightweight.”
- “I’m able to do dentistry unimpeded using this system.”
- “I liked the ability to see through the mask.”
- “We found that the system was effective in delivering nitrous oxide and oxygen.”
- “I liked the scented masks. Patients didn’t complain about a plastic/rubber smell.”
Clinical Tips
- Size selection is very important – go down in size.
- Stretch the mask laterally when placing it and make sure the hose goes behind the ears.
- Let tubing dry for 5 hours after sterilization before use or it will be tacky and sticky.
- Turn the vacuum hose to the lowest power – the tight fit allows the evacuation of
- too much nitrous if you do not adjust the scavenging unit down.
- When using CSR-wrapping the tubing for sterilization, make sure there are no kinks in it.
Evaluation Highlights
Axess Low Profile Nasal Mask System was evaluated by 33 consultants, and was used 405 times in total.
- Soft, pliable and low profile translucent and clear single-use masks.
- Masks available in unscented, bubble-gum and mint scents.
- Lightweight, autoclavable tubing.
- Provides for good access to the clinical site.
Special Features
- Slim, low profile mask allows good visibility and access to the clinical site.
- Slender, lightweight scavenging circuit tubing to maximize accessibility to the oral cavity.
- Translucent and clear masks show the patient breathing – the masks fog up on exhalation.
- Comfortable for patients.
Indication
- Use when nitrous oxide/oxygen sedation is required.
Description
Axess™ Low Profile Nasal Mask System is used to deliver nitrous oxide/oxygen and to remove excess and exhausted gases. It consists of single-use, disposable nasal masks and reusable scavenging circuit tubing. The masks are small, low profile, latex-free and pliable for stability, complete access to oral cavity and to minimize ambient nitrous oxide and gas leakage from the mask. Masks are available in packs of 24 in either small, medium or large and for each size either as unscented (clear), bubble-gum scented (pink) or mint-scented (green) masks. Axess Scavenging Circuits are also latex-free and suitable for Crosstex/Accutron’s RFS Remote Flow System and In-Line/Accu-Vac vacuum controllers. The slender tubing wraps behind the patient’s ears and is secured by a slider under the chin. They are available in single packs with 6-foot long tubing, a complimentary selection of masks, a small gas connector, and various scavenging system adapters. Crosstex and Accutron are now proud members of HuFriedyGroup.
Riva Star
Overview
- 24 Clinical Evaluators
- 212 Total Uses
- 90% Clinical Rating
Consultants’ Comments
- “Ease of use and minimal staining. This is a well thought out product.”
- “It did not turn the unattractive black color like its competitor.”
- “Much, much better than competitor. Less messy.”
- “Easy to use two-step procedure.”
- “Less worry about staining.”
- “Desensitizing effect was great.”
- “Two steps require longer working time.”
- “I found it hard to adequately isolate due to the viscosity of this material.”
Description
Riva Star is a next generation SDF:
- SDF + KI system
- Unlike other silver diamine fluoride systems, Riva Star’s two-step procedure minimizes the risk of staining
- Two-year and beyond desensitizing effect
- Non-invasive and ideal for minimally invasive dentistry
Clinical Tips
- Very good at determining caries missed at initial excavation.
- It can be tempting to only place one application of the KI material, but make sure to place multiple applications until the white precipitate turns clear (around 90 seconds).
Unique Attributes
- Versatile indications
- An SDF material with minimal staining
- Increases bond strengths of glass ionomer restorative materials to dentin
Indications
- Desensitizing
- An SDF material with minimal staining
- Increases bond strengths of glass ionomer restorative materials to dentin
elements™ IC Obturation System
Consultants’ Comments
- “Very smooth injection of gutta percha.”
- “I have a traditional elements™ obturation system, and the new elements™ IC is cordless and more ergonomic!”
- “The gutta percha slightly backed up after extruding, which was nice.”
- “I liked the speed that the system heated to my desired temperature.”
- “I would prefer it if the time it takes for the plunger to travel through the hand piece to engage the cartridges was faster.”
- “The unit would ‘time-out’ and automatically shut-off quicker than I would like.”
- “The gutta percha cartridge tips were was to bend and insert into the canals.”
Clinical Tips
- The unit has an automatic shut-off timer, so do not start warming the units too early or they may shut-off before you are ready to use them.
- Do not overlook the included cartridge tip bender. It is very effective at obtaining the desired angulation of the gutta percha cartridge tips prior to obturating.
- The smaller tips bend very easily. Be cautious when placing into the canals, as to not bend them out of shape.
Evaluation Key Features
The elements IC Obturation System:
- Was evaluated by 9 consultants
- Had an average of 17 uses per consultant
- Received a 96% clinical rating
Description
The elements™ IC Obturation system:
- Cordless
- Downpack heat source and backfill gutta percha extruding unit in one system
- Inductive charging and extended battery life compared to previous versions
- Backfill unit contains precise digital temperature control with rapid heating and adjustable heating range
- Downpack unit features aerogel insulation for a high level of protection against heat
