Within the limits of the limited testing, Hi-Bond UNIVERSAL has average initial dentin bond strength with no significant difference with phosphoric etching. The self-etch enamel bond strength is slightly below average, which improves after phosphoric etching. Etching enamel with phosphoric acid is recommended for maximum bond strength and marginal integrity. SEM imaging of restorations placed in teeth showed sufficient dentin tubule penetration with formation of a hybrid zone and consistent film thickness.
Within the limits of the proof testing, K-Bond Universal (Spident) has average dentin bond strength and Self-etch enamel bond strength is slightly below average for universal adhesives. Etching enamel with phosphoric acid is recommended for maximum bond strength and marginal integrity. SEM imaging of restorations placed in teeth showed a consistent film thickness under 10 microns.
ExperTemp™ Temporary Crown & Bridge Material from Ultradent is a bis-acryl composite provisional material. Designed to resemble natural dentition, it is available in six shades and reportedly has a fluorescence similar to enamel. ExperTemp™ is available in shades A1, A2, A3, A3.5, B1, and Bleach White. One cartridge yields approximately 40-50 crowns.
“Handling and set time are great!“
Initial Insights
Handling and set time are great!
It cures quickly and seems strong.
Would be great if the dispensing gun stood on its own.
So far so good!
The color is pretty accurate; the B1 shade seemed a little off.
Keep an eye out for this product in an upcoming issue of DENTAL ADVISOR!
BioGreen™ Biodegradable Micro-Applicators from Premier® are an eco-friendly alternative to plastic applicators. Made from a straw-byproduct, they are biodegradable and compostable. These applicators are gluten-free and have lint-free brush tips. They are available in three sizes: regular, fine, and super-fine.
BioGREEN Biodegradable Micro Applicators
BioGREEN Biodegradable Micro Applicators Tips
Initial Insights
Very high quality brush.
Does not leave lint or debris behind.
Bends easily and does not break!
Love that these are eco-friendly!
From our labs; “I didn’t see any lost bristles which is usually my main concern. Loose fibers can cause contamination and bond failure.”
Keep an eye out for this product in an upcoming issue of DENTAL ADVISOR!
SafeMatrix™and SafeMatrix™ Contour from Medicom® are pre-assembled, disposable matrix bands. Their unique push-button band diverter is designed to provide ease of use for the clinician and comfort for the patient. Both SafeMatrix™ and SafeMatrix™ Contour are available in wide (6mm) and narrow (4.5mm) widths and come in packs of 50.
Pre-assembled
Initial Insights
I use these all the time. I love that they are single use and ready to go, regardless of the quadrant.
The new deflector button is a nice addition, as it adds more anatomical contour for a better fit on the tooth.
Would be great to have the option of a dead-soft or thinner band, as obtaining a tight contact with composite can be a little tricky.
My assistants struggle with correctly placing the matrix band on the tofflemire retainer for the appropriate tooth and these take out the guess work.
Keep an eye out for this product in an upcoming issue of DENTAL ADVISOR!
With so many dental materials having the same color, it’s easy to grab the wrong product. e1 Acid Etchant Gel from e Dental Products helps prevent this mistake. Available in six vibrant colors, there’s no need to worry about accidental mix-ups.
Designed to etch enamel, dentin, and glass ionomer cements, this dental etchant reports to have exceptional viscosity and handling properties. Application and rinsing are easy, with no residue left behind.
e1 Etchant may be purchased in packs ranging from 6 to 144 syringes. Refills are also available! e Dental Products report this etch is always fresh and never short dated.
Available in shades of orange, green, pink, sea-foam, blue, and purple.
Not runny and stays in place
Available in six vibrant colors!
Initial Insights
The fact that it is easy to rinse is nice because I am not worried that my assistant has to use the water and air combined to “blast” it off the tooth just to rinse it all off, and ultimately getting some in patient’s mouth.
Adds a little fun and would definitely prevent mistakes! Our zirconia cleaner looks exactly like our phosphoric acid and this material would prevent mix-ups when grabbing things quickly.
The viscosity is great for selective etching. Wherever we placed it, it stayed and was not runny.
Could be useful in a pediatric practice. Children can participate in their own treatment by choosing a color.
Keep an eye out for this product in an upcoming issue in DENTAL ADVISOR!
